Skip to the content of the web site.

Stefan Steiner's Publications

Published Research Articles

  1. Steiner SH, Stevens NT, Browne R and MacKay RJ (2011), “Planning and Analysis of Measurement Reliability Studies,” Canadian Journal of Statistics, 39, 344-355.
  2. Stevens NT, Steiner SH, MacKay RJ and Smith IR (2011) “Monitoring Radiation in Cardiology Imaging Equipment,” Medical Physics, 38, 317-326.
  3. Morton A, Mengersen K, Waterhouse M, Steiner SH, Looke D (2010) "The Sequential Analysis of Uncommon Adverse Outcomes,” Journal of Hospital Infection, 76, 114-118.
  4. Morton A, Mengersen K, Waterhouse M, Steiner SH (2010) “The Analysis of Aggregated Hospital Infection Data for Accountability," Journal of Hospital Infection, 76, 287-291.
  5. Stevens N, Browne R, Steiner SH and MacKay RJ (2010) “Augmented Measurement System Assessment,” Journal of Quality Technology, 42, 388-399.
  6. Browne R, Steiner SH, MacKay RJ (2010) “Leveraged Gauge R&R Studies,” Technometrics, 52, 294-302 (winner of the American Statistical Association’s W.J. Youden Award in Interlaboratory Testing).
  7. Danila O, Steiner SH and MacKay RJ (2010), “Assessment of a Binary Measurement System in Current Use,” Journal of Quality Technology, 42, 152-164.
  8. Browne R, Steiner SH, MacKay RJ (2010) “Optimal Two-Stage Reliability Studies,” Statistics in Medicine, 29, 229-235.
  9. Steiner SH, Grant K, Coory M, Kelly HA (2010) “Detecting the Start of an Influenza Outbreak using Exponentially Weighted Moving Average Charts,” BMC Medical Informatics and Decision Making, 10:37.
  10. Asilahijani H, Steiner SH and MacKay RJ (2010) “Reducing Variation in an Existing Process With Robust Parameter Design” Quality Engineering, 22, 30-45.
  11. Chipman HA, MacKay RJ and Steiner SH (2010), Discussion of “Nonparametric Profile Monitoring by Mixed Effects Modeling” by Qiu P, Zou C and Wang Z, Technometrics, 52, 280-283.
  12. Steiner SH and Jones M (2009) “Risk Adjusted Survival Time Monitoring with an Updating Exponentially Weighted Moving Average (EWMA) Control Chart” Statistics in Medicine, 29, 444-454.
  13. Steiner SH and MacKay RJ (2009) “Teaching Process Improvement Using a Virtual Manufacturing Environment,” American Statistician, 63, 4: 361-365.
  14. Steiner SH and MacKay RJ (2009) “Designed Experiments with Fixed and Varying Inputs – A Cautionary Tale,” Quality Engineering, 21, 384-391.
  15. Browne R. MacKay RJ Steiner SH. (2009) “Improved Measurement System Assessment for Processes with 100% Inspection”, Journal of Quality Technology 41, 376-388.
  16. Browne R. MacKay RJ Steiner SH. (2009) “Two Stage Leveraged Measurement System Assessment,” Technometrics, 51, 239–249.
  17. Chenouri S Variyath AM and Steiner SH. (2009) “A Multivariate Robust Control Chart for Individual Observations,” Journal of Quality Technology, 41, 259-271.
  18. Liu X, MacKay RJ, Steiner SH (2008) “Monitoring Multiple Stream Processes,” Quality Engineering, 20, 296-308.
  19. Danila O, Steiner SH and MacKay RJ. (2008) “Assessing a Binary Measurement System,” Journal of Quality Technology, 40, 3, 312-320.
  20. Steiner SH, MacKay RJ and Ramberg JS (2008). “An Overview of the Shainin SystemTM for Quality Improvement,” with discussion Quality Engineering, 20:1, 6–19.
  21. Steiner SH, MacKay RJ and Ramberg JS (2008). Rejoinder to discussion of “An Overview of the Shainin SystemTM for Quality Improvement,” Quality Engineering, 20:1, 42–45.
  22. Steiner SH, Hamada M, Giddings White BJ, Kutsyy V, Mosesova S and Salloum G. (2007) “Using Projects in an Advanced Design of Experiments Class: A Bubble Mixture Experiment Example,” Journal of Statistical Education, March (online journal).
  23. Steiner SH and MacKay RJ (2006), “Statistical Engineering: A Case Study,” Quality Progress, June, 33-39.
  24. Steiner SH and MacKay RJ (2006), “An Algorithm to Reduce Process Variation,” European Network for Business and Industrial Statistics (ENBIS) Magazine insert in Scientific Computing World, April-May, 36-37.
  25. Novick RJ, Fox SA, Stitt LW, Forbes TL Steiner SH. (2006),“Direct Comparison of Risk-adjusted CUSUM and Non-risk Adjusted Analyses of Coronary Artery Bypass Surgery Outcomes,” Journal of Thoracic and Cardiovascular Surgery, 132, 2, 386-391.
  26. Steiner SH (2006), Discussion of William H. Woodall’s “The Use of Control Charts in Health-Care and Public-Health Surveillance,” Journal of Quality Technology, 111-112, 38.
  27. Hamada M, Martz H and Steiner SH (2005) “Accounting for Mixing Errors in Analyzing Mixture Experiments, Journal of Quality Technology 37, 139-148.
  28. Forbes TL, Steiner SH, Lawlor DK, DeRose G, Harris KA (2005) “Risk Adjusted Analysis of Outcomes Following Elective Open Abdominal Aortic Aneurysm Repair,” Annals of Vascular Surgery, 19(2), 142-148.
  29. Harris JR, Forbes TL, Steiner SH, Lawlor DK, DeRose G, Harris KA (2005) “Risk Adjusted Analysis of Early Mortality Following Ruptured Abdominal Aortic Aneurysm Repair” Journal of Vascular Surgery, 42, 3, 387-39.
  30. Steiner SH and MacKay RJ (2004) “Scale Counting”, Technometrics, 46, 348-354. Winner of the American Society for Quality’s Wilcoxon Prize for the best practical applications paper 2004.
  31. Steiner SH and MacKay RJ (2004) “Effective Monitoring of Processes with Parts Per Million Defective: A Hard Problem” Frontiers in Statistical Quality Control 7, H.J. Lenz and P.T. Wilrich editors, Physica-Verlag, 140-149.
  32. Steiner SH, Cook R and Farewell V (2003) “Risk-adjusted Monitoring of Binary Surgical Outcomes,” IMIA (International Medical Informatics Association) Yearbook of Medical Informatics. Quality of Health Care: The Role of Informatics, Schattauer GmbH Stuttgart Germany, 570-578.
  33. Cook DA, Steiner SH, Cook R and Farewell V (2003) “Monitoring the Evolutionary Process of Quality: Tracking Outcomes in Intensive Care with the Risk Adjusted CUSUM,” Critical Care Medicine, 6, 1676-1682.
  34. Drezner Z, Steiner SH and Wesolowsky GO (2002) “On the Circle Closest to a Set of Points,” Computers and Operations Research, 29, 637-650.
  35. Steiner SH and MacKay RJ (2001), “Detecting Changes in the Mean from Censored Lifetime Data,” Frontiers in Statistical Quality Control 6, H.J. Lenz and P.T. Wilrich editors, Physica-Verlag, 275-289.
  36. Steiner SH and MacKay RJ (2001), “Monitoring Processes with Data Censored Owing to Competing Risks by using Exponentially Weighted Moving Average Control Charts,” Applied Statistics, 50, 293-302.
  37. Steiner SH, Cook R and Farewell V (2001), “Risk Adjusted Monitoring of Surgical Outcomes,” Medical Decision Making, 21, 163-169.
  38. Steiner SH, Cook R, Farewell V and Treasure T (2000), “Monitoring Surgical Performance Using Risk Adjusted Cumulative Sum Charts,” Biostatistics, 1, 441-452.
  39. Steiner SH (2000), “Statistical Process Control Using Two Measurement Systems,” Technometrics, 42, 178-187.
  40. Steiner SH and MacKay RJ (2000), Discussion of W.H. Woodall’s article “Controversies and Contradictions in Statistical Process Control,” Journal of Quality Technology, 32, 370-372.
  41. Steiner SH and MacKay RJ (2000), “Monitoring Processes with Highly Censored Data,” Journal of Quality Technology, 32, 199-208.
  42. Steiner SH (1999), “EWMA Control Charts with Time-Varying Control Limits and Fast Initial Response,” Journal of Quality Technology, 31, 75-86.
  43. Steiner SH, Cook R and Farewell V (1999) “Monitoring Paired Binary Surgical Outcomes Using Cumulative Sum Charts,” Statistics in Medicine, 18, 69-86. 
  44. Steiner SH (1999), “Confirmation Sample Control Charts,” International Journal of Production Research, 37, 737-748.
  45. Steiner SH (1998) “Grouped Data Exponentially Weighted Moving Average Control Charts,” Applied Statistics, 47, 203-216.
  46. Steiner SH (1997-1998), “Pre-control and Some Simple Alternatives,” Quality Engineering, 10, 65-74.
  47. MacKay RJ and Steiner SH (1997-1998), “Strategies for Variability Reduction,” Quality Engineering, 10, 125-136.
  48. Steiner SH and Hamada M (1997), “Making Mixtures Robust to Noise and Mixing Measurement Errors,” Journal of Quality Technology, 29, 441-450.
  49. Steiner SH, Geyer PL and Wesolowsky GO (1996), “Grouped Data Sequential Probability Ratio Tests and Cumulative Sum Control Charts,” Technometrics, 38, August, 230-237.
  50. Steiner SH, Geyer PL and Wesolowsky GO (1996), “Shewhart Control Charts to Detect Mean Shifts Based on Grouped Data,” Quality and Reliability Engineering International, 12, 345-353.
  51. Geyer PL, Steiner SH and Wesolowsky GO (1996), “Optimal SPRT and CUSUM Procedures with Compressed Limit Gauges,” IIE Transactions, 28, 489-496.
  52. Steiner SH, and Wesolowsky GO (1995), “Estimating the Correlation between Destructively Measured Variables Using Proof-loading,” Technometrics,  37, 1, 94-101.
  53. Steiner SH, Geyer PL and Wesolowsky GO (1994), “Control Charts Based on Grouped Observations,” International Journal of Production Research, 32, 1, 75-91.
  54. Steiner SH and Wesolowsky GO (1994), "Simultaneous Acceptance Control Charts for Products with Multiple Correlated Characteristics," International Journal of Production Research, 32, 3, 531-543.

(top)

Consulting
Book
Homepage



Last Modified:  Tuesday 13 December 2011
XHTML CSS W3C-WAI